Revolutionary & Patented Nano Ceramic Technology
Easy Treatment of Engine: Restore, Repair & Protect

Nano spherical ceramic powder manufacturing,
Platinum coating technology and nano dispersion & absorption technology
developed by Korea NanoTech Institute.

The combination of Platinum coated ceramic
nano powder
has great advantage for engine restoration
with endurance of high temperature, humidity, superior lubrication and
great combustibility without side-effect.

The restoring ability could be well harmonized with platinum
coated nano ceramic powder
Our uniquely developed platinum coated ceramic is 20 times stronger than steel and Platinum is helpful for great combustibility & powerful engine.

Restoring Process of Nano Energizer
Excellent Ceramic cermet coating

nano ceramic powder mixed with engine oil restores
worn-out parts of engine.
Cracked parts have high electric potential and charged particles
are moved selectively into cracked parts.
Tight platinum metallic cohesion is conducted by heat and pressure.
After restoring, cracked parts of engine is recovered and nano powder
forms lubricant membrane on inner wall of engine.

Smoother, Quieter Engine with more Power & economical solution.

Fuel savings up to 8-21 %(up to 40% in idle mode)
5 times lowered noise and vibration levels
Restores friction surfaces and protects against wear
100 times reduction of the friction coefficient
Increased oil pressure & great combustibility
Brings engine power up to 100%
3-9 times reduction in CO and CH in the exhaust
good for the environment
safe & guaranteed

How to use

Injection Objects:
Nano Energizer recommended for automobiles at least 3,000 km of use.
The effect is better for old cars.
It can be used for any type of cars that uses mineral and synthetic oil.

Injection Period:
Injection is available at anytime, but effective period is
when engine oil is being changed.
Recommended to change Nano Energizer upon driving 30,000km.
Wear resistance of the protective coating is guaranteed
within 1year at any running.

Injection Method:
Warm up engine after change engine oil.
Shake Nano Energizer enough before injection, as subsidence may occur for long storage.
Open oil filler cap and inject Nano Energizer slowly.
Close oil filler cap and keep idle for 20 minutes or drive 30km.

After injection of nanoE AIO, ceramic coating on engine metallic surface will be applied from 500km - 700km run and feel great effect: power increase,
smooth, noisy drop and smoky stop & fuel saving.

After running 1,500Km upon injection of nanoE, freely you can change engine oil. Because perfect cermet coating process within 1,500km run will be already completed on engine surface.

The effect of nanoE will be continued till 30,000km to 50,000km with just one injection of nanoE AIO.

A single Injection ensures a powerful engine with smoother, quieter, more
economical operation.